2015 FORD EXPLORER XLT VIN 1FM5K7D87FGC48055

The Ford Explorer XLT described here left the factory in 2015. Power comes from a 3.5-litre petrol engine with six cylinders. There is an automatic gearbox, with front-wheel drive.

The source data puts the mileage at 294,613 miles. The instruments count in miles; the same distance in kilometres is about 1.6 times the figure. A car that has covered this much distance for its age has worked hard, and a mechanic should judge the wear accordingly. Services and inspections note the distance covered, so a car with an ordinary past builds up a trail of figures that climb year after year. Service invoices and inspection reports each carry a mileage figure, and lined up in order they show whether the clock tells the truth.

The main issue noted for this car is damage to both front and rear. Two cars with the same damage label can be very different: one needs a few new parts, the other major work. A lift and a diagnostic check show what photos cannot: bent brackets behind a panel, chafed wiring or deployed airbags.

At the time of recording, the car ran and drove. A key was present.

The record shows a salvage title. Such a title means the car was declared a total loss and can return to the road only after repair and inspection. A branded title follows the car through every change of owner, so it remains part of its history.

A car’s history is the sum of what has happened to it since it was new, and most of it has left a trace on paper somewhere. What a car has been through is seldom visible at first glance, and a respray can make even a badly damaged car look sound.

Regular oil changes and timely work on the timing belt or chain decide how well an engine copes with age. Many modern petrol engines are turbocharged and direct-injected; where they are, the turbocharger and injectors belong on a specialist’s checklist. Automatic transmissions, CVTs included, are expensive to repair, so the test drive should include pulling away from a standstill and a stretch at motorway speed.

A history check works by VIN because the number never changes, unlike registration plates and owners. The VIN of this Ford Explorer XLT is 1FM5K7D87FGC48055. The number in the car’s documents should match the one stamped into the body and the one on the plate at the base of the windscreen.

A VIN report shows what has been logged: earlier registrations, odometer figures, damage entries, branded titles and theft checks, wherever such data exists. A repair paid for in cash at a small workshop leaves no trace in any database, so no report can list it. A VIN check and a physical inspection answer different questions: the first says what happened to the car, the second what condition it is in now. The history behind VIN 1FM5K7D87FGC48055 is the natural starting point before any decision about this Ford Explorer XLT.